top of page

Equestrian Apparel Sourcing in 2026: The Tariff and Landed-Cost Map

Oct 23
19 min read

Updated: Oct 26

Last updated: 26 October 2026


10%

Extra US duty on Indian apparel since 24 July 2026

0%

UK duty on 1,143 Indian textile lines under CETA

$2.20

India's duty edge over China on a $22 breech


Three things changed the economics of equestrian apparel sourcing in 2026, and most riding-wear brands are still pricing off the old numbers.


The US Supreme Court struck down the IEEPA tariffs in February. A new Section 301 forced-labour tariff replaced them on 24 July 2026, putting India, Pakistan, Bangladesh, Cambodia, Sri Lanka and Indonesia in a 10% tier and China, Vietnam and Türkiye in a 12.5% tier, each on top of ordinary MFN duty. And on 15 July 2026 the India–UK trade agreement came into force, taking 1,143 textile tariff lines into Britain from up to 12% down to zero.


For anyone making breeches, show shirts, technical base layers or competition jackets, that is a 2.5 percentage-point swing between Asian sourcing bases into the US, and a far larger one into the UK. This page sets out what the rules now say, what a pair of breeches actually costs to land, and where the production clusters sit.


The short version


  • Into the US: India and Pakistan carry a 10% additional duty; China and Vietnam carry 12.5%. Both stack on top of MFN, which for most knit and woven garment lines runs roughly 12–32%.

  • Into the UK: Indian-made apparel now enters duty-free on 1,143 textile lines under CETA. China, Vietnam and Türkiye do not have that access.

  • Watch for: the tariff-rate quota promised to Bangladesh, Cambodia, Indonesia and Malaysia. It is written into the measure but is not yet operational, and it will reshuffle the ranking when it starts.

  • On the retail side: the collapse of a major US specialty chain in mid-2026 has pushed more volume to brand-direct and multi-brand e-commerce, which changes order sizes and replenishment rhythm more than it changes unit cost.


Stacked shipping containers at a port, representing import duties on apparel
Three legal instruments in six months: the duty on a garment import is not what it was in January.

What changed in 2026, in order


The tariff regime that applied to garment imports at the start of 2026 is not the one that applies now. Three separate legal instruments came and went in six months, and the numbers quoted in most sourcing guides still refer to the first of them.


Date

What happened

Effect on apparel imports

6 Feb 2026

US–India joint statement sets an 18% reciprocal rate under Executive Order 14257, covering textiles and apparel

Framework only; widely reported as the new India rate

20 Feb 2026

Supreme Court rules in Learning Resources, Inc. v. Trump that IEEPA does not authorise tariffs

Removes the legal basis for the 18% figure

24 Feb 2026

A temporary 10% global tariff is applied under Section 122

Flat 10%, all origins, time-limited by statute

23 Jul 2026

USTR announces the final action in the Section 301 forced-labour investigations covering 60 economies

Replaces the expiring Section 122 measure

24 Jul 2026, 12:01 a.m. ET

Additional tariffs take effect on entries for consumption

10% or 12.5% by country, on top of MFN

28 Jul 2026

Notice published at 91 FR 47318 with the annexes and Chapter 99 headings

The operative text for classification


The practical consequence: if a costing sheet still carries 18% for India, or 50%, or a flat 10% for everyone, it is wrong. The figure that applies to goods entering the US today is the Section 301 rate for that origin, added to the ordinary MFN rate for that HTS line.


The measure includes an in-transit carve-out for goods that were loaded before 24 July and entered before 28 July. That window has long closed. There is no published sunset or review date for the tariffs themselves.


If you paid IEEPA duty in 2025, some of it is reclaimable


The practical afterlife of the struck-down tariffs is a refund programme, and it is still running. IEEPA duties collected between early 2025 and 24 February 2026 are refundable, and US Customs has been working through them in phases. Phase 3, covering entries that have already finally liquidated, opened on 6 October 2026 — at present limited to plaintiffs in the Court of International Trade litigation rather than all importers.


This matters to a manufacturer only indirectly, but it matters to your buyers a great deal. Any US brand that imported through 2025 has money sitting in this process, and most mid-sized brands have not checked whether their entries qualify. It is worth one email to a customs broker.


For the record, the operative Chapter 99 headings: 9903.05.44 carries the 10% Section 301 forced-labour duty on goods of India. Articles already subject to Section 232 duties fall under 9903.05.90 and pay their Section 232 rate instead of the forced-labour duty, not both.


The 2026 tariff tiers by sourcing country


The Section 301 final action assigns every covered economy to a tier. The presidential memorandum of 23 July 2026 names seventeen economies at a flat 10%; everything else investigated sits at 12.5%. A small group — the EU, Taiwan, Japan, Korea and Switzerland — is handled differently, with the Section 301 rate set so that MFN plus Section 301 reaches a target figure rather than adding to it.


Sourcing base

Section 301 additional rate

Also note

India

10%

No TRQ. India–UK CETA gives separate duty-free UK access

Pakistan

10%

Cited for failure to enforce rather than failure to impose

Bangladesh

10%

Textile TRQ promised, not yet operational

Cambodia

10%

Textile TRQ promised, not yet operational

Indonesia

10%

Textile TRQ promised, not yet operational

Sri Lanka

10%

No TRQ

Malaysia

10%

Textile TRQ promised, not yet operational

China

12.5%

Applies in addition to existing Section 301 China duties

Vietnam

12.5%

No TRQ

Türkiye

12.5%

No TRQ

EU, Taiwan

Set so MFN + 301 = 10%

Zero where MFN already reaches 10%

Japan, Korea, Switzerland

Set so MFN + 301 = 12.5%

—


These rates stack on MFN. The additional duty does not replace the ordinary Harmonized Tariff Schedule rate for the line; it is added to it. For garments that matters a great deal, because MFN on apparel is not small. Knit and woven garment lines in HTS Chapters 61 and 62 commonly fall between about 12% and 32%, depending on fibre content and construction, and synthetic-rich technical garments sit toward the upper end of that band. Work from the specific HTS line, never from a sector average.


The quota that has not started yet. Section 2 of the notice directs USTR to establish tariff-rate quotas for Bangladesh, Cambodia, Indonesia and Malaysia, with an initial duration of three years, allowing a set volume of specified textiles and apparel to enter free of the Section 301 tariff. India's Press Information Bureau confirmed in July that the mechanism was “yet to be established and operationalised”. Until USTR publishes the volumes and a start date, those four origins pay the same 10% as everyone else in the tier. When it begins, in-quota volumes from those four will undercut India and Pakistan on duty. Brands planning 2027 and 2028 buys should treat this as a scheduled change, not a rumour.


What is excluded. Articles already subject to Section 232 tariffs are carved out, as are informational materials, donations and accompanied baggage. There are country-specific exemption annexes for thirteen economies, and a textile and apparel carve-out covering Jordan outright plus El Salvador and Guatemala where goods enter duty-free under CAFTA-DR. Chapters 61 and 62 are not excluded as a category for the Asian sourcing bases.


What a pair of technical breeches actually costs to land


Garment worker cutting technical fabric on a production table beside fabric rolls
Fabric choice and cutting yield move landed cost as much as the tariff does.

Tariff percentages are abstract until they meet a unit cost. Here is the arithmetic on a representative pair of women's synthetic full-seat competition breeches, using an illustrative FOB of $22.00 and an illustrative MFN rate of 28.2%, which is the general rate on several women's synthetic woven trouser lines in HTS heading 6204.63.


The FOB figure is an example, not a quotation, and the MFN rate depends entirely on the classification your customs broker assigns. Fibre content, knit versus woven construction and the presence of a gusset or grip panel can all move the line.


Cost element

India (10%)

Vietnam (12.5%)

China (12.5% + legacy)

FOB unit cost

$22.00

$22.00

$22.00

MFN duty at 28.2%

$6.20

$6.20

$6.20

Section 301 forced-labour duty

$2.20

$2.75

$2.75

Legacy China List 4A at 7.5%

—

—

$1.65

Freight and insurance, allowance

$1.10

$1.10

$1.10

Duty-paid landed cost

$31.50

$32.05

$33.70


The spread between India and China on this example is $2.20 a unit, or about 7% of landed cost. On a 3,000-piece buy that is $6,600. It is real money, but it is smaller than the spread most brands can create or destroy through fabric selection, yield at cutting, and whether the first production run needs reworking.


Two things the table deliberately leaves out. Duty is assessed on the customs value, which is usually the transaction value rather than FOB plus freight, so your broker's figure will differ slightly from a simple FOB-times-rate calculation. And the legacy China List 4A rate applies to some apparel lines and not others; check the specific subheading rather than assuming.


The duty line is now large enough, relative to FOB, that it belongs in the sourcing decision, not in the landed-cost afterthought.


Classification and fees: the two lines most costings get wrong


Tariff tiers get the attention. Classification errors cost more, because they repeat on every shipment and stay invisible until an audit. Riding apparel is unusually easy to misclassify, because it sits between sportswear, workwear and tailoring, and the duty rate follows construction and fibre rather than what the garment is for.


Rolls of technical textile stacked in a mill, illustrating how fabric construction determines tariff classification
Fabric construction, not end use, decides the tariff line. Knit or woven is the single most consequential determination.

Which HTS line a riding garment falls under


The headings below are the ones equestrian product most commonly lands in. Treat them as a starting point for the conversation with your broker, not as a classification — the binding answer is always the specific 10-digit line for the specific garment.


Garment

Construction

Commonly used heading

Women's breeches, riding tights

Knitted, man-made fibre

6104.63 family (Ch. 61)

Women's breeches

Woven, synthetic

6204.63 family (Ch. 62)

Men's breeches

Woven, synthetic

6203.43 family (Ch. 62)

Technical base layers, training tops

Knitted, man-made fibre

6109.90 and 6110.30 families

Show and competition shirts

Knit or woven

6106 (knit), 6206 (woven)

Softshell, waterproof outerwear

Coated or laminated

6210 family; 6113.00 coated knits

Competition jackets, shells

Woven, uncoated

6201 and 6202 families


Four questions decide the outcome:

  1. Is the fabric knitted or woven? This moves the garment between Chapter 61 and Chapter 62, and the rates on those lines are not the same.

  2. Is it coated, laminated or impregnated with plastics — and is that coating visible to the naked eye? Coated constructions frequently carry a materially lower rate than the uncoated equivalent.

  3. What is the chief-weight fibre? Chief weight governs, not the fibre named on the marketing label.

  4. Is the garment gender-specific by cut, and does the construction evidence support that?


Three places equestrian brands lose money on classification


  • Silicone seat and knee patches. A full-seat or knee-patch silicone application can change the coating analysis for the whole garment. Worth having tested rather than assumed, because it can move the line in your favour.

  • Mixed-fibre stretch blends. Chief weight decides, so a breech sold as polyester that is 61% polyamide classifies somewhere else entirely. Costings built on the marketing name are routinely wrong.

  • Sets and coordinates. A breech shipped with a matching base layer as a retail set may classify differently from the same two garments shipped separately.


On a breech programme, the gap between two plausible classifications is routinely larger than the entire freight bill.

The conclusion is procedural rather than clever: get a binding ruling for any new construction before the first production shipment, not after the first audit. Bonding, lamination and grip application are the three that most often warrant one.


The fees that are not duty


Two US charges sit outside the duty calculation and are small enough to be left out of most models, which is fine until the model is being used to compare origins at the margin.


  • Merchandise Processing Fee: 0.3464% of customs value per formal entry. From 1 October 2026 the floor and ceiling are $34.58 and $670.86, which means it behaves like a fixed cost on small shipments and a true percentage on large ones. On a 300-piece sample-and-launch order it is a real per-unit number.

  • Harbor Maintenance Fee: 0.125%, ocean freight only. Air shipments do not attract it, which marginally narrows the cost gap between air and sea on a high-value technical garment.


Duty is also assessed on customs value, which is normally the transaction value rather than FOB plus freight — so a broker's figure will not exactly match the simple arithmetic in the table above. For origin comparison that does not matter. For a quoted landed price to a buyer, it does.

The UK picture: CETA changed the maths on 15 July 2026


The India–UK Comprehensive Economic and Trade Agreement entered into force on 15 July 2026, after ratification by both parties and a delay from the originally expected May date. UK tariffs were removed on 99% of Indian goods immediately on entry into force, clothing and footwear included.


For textiles specifically, the agreement removes duties on 1,143 tariff lines that previously carried rates of up to 12%. India was already the UK's fourth-largest textile supplier, with roughly a 6.1% share and about $1.79bn in annual exports, so this is a shift in an established trade lane rather than the opening of a new one.


What this means in practice for a UK equestrian brand:

  • Against China, Vietnam and Türkiye, Indian-made riding apparel now has a duty advantage into Britain that did not exist before July. On a garment that previously attracted 12%, that is the whole 12%.

  • Against Bangladesh, Pakistan, Cambodia and Sri Lanka, the advantage is smaller or absent. Those origins already held duty-free or preferential UK access through existing schemes, so CETA brings India to parity rather than ahead.

  • The paperwork is real. Preferential rates are not automatic. Importers need to be registered with HMRC and to satisfy the agreement's rules of origin for the line in question. The textile rules of origin are not summarised in the coverage; they sit in the CETA text itself and are worth having your broker read before the first preferential entry rather than after it.


A brand selling into both the US and the UK now faces genuinely different duty geometry on each side. The origin that is optimal for a US-bound order is not automatically optimal for a UK-bound one, and for the first time in several years it is worth modelling the two markets separately rather than picking one factory and shipping everywhere from it.


Where equestrian apparel is actually made


Equestrian apparel is a small, technical corner of the garment industry, and it is not made everywhere that garments are made. The category needs stretch-woven and warp-knit competence, silicone printing or bonding, reinforced seaming, and the patience to grade for a seated, bent-leg posture rather than a standing one. That narrows the field considerably.


Production floor at the Level Up Textiles facility in Kanpur, India
Part of the Level Up Textiles facility in Kanpur.

Cluster

Strength for riding wear

Typical fit

Kanpur, India

Leather and allied equestrian goods heritage; technical apparel and made-ups; English-discipline product knowledge

Breeches, competition shirts, jackets, full equestrian ranges

Tirupur, India

Knitwear at scale; around 55% of India's knitwear exports, roughly ₹46,000 crore in 2025–26 per the Tiruppur Exporters' Association

Base layers, polos, technical tees, training wear

Sialkot, Pakistan

Long-established equestrian and sporting-goods base; gloves, chaps, riding apparel

Gloves, chaps, entry and mid-tier apparel

Guangdong and Fujian, China

Deepest technical fabric and trims ecosystem; fastest development cycles

Complex technical outerwear, protective product, hardware-heavy items

Vietnam

Strong synthetic performance-wear capability built on the athletic category

High-volume technical bottoms and tops

Portugal and Türkiye

Short lead times to EU and UK; strong on premium finishing

Small premium runs, fast replenishment for European brands


Two observations that matter more than the table.


Equestrian is a low-MOQ category in a high-MOQ industry.

Equestrian is a low-MOQ category in a high-MOQ industry. A riding-wear brand ordering 400 pairs of breeches across six sizes and three colourways is asking a factory for short runs with high SKU complexity. Clusters that serve athletic or fast-fashion volume are often structurally poor at this, whatever their technical capability. The question to ask a prospective supplier is not whether they can make the garment but whether your order size is normal for them.


Discipline knowledge is not transferable. A factory that makes excellent yoga leggings will not automatically get a full-seat breech right. Knowing where the grip panel must stop so it does not catch the saddle flap, how much rise a dressage seat needs versus a jumping seat, and why a show shirt's collar has to sit correctly under a stock tie are category-specific. They are learned from making the product, not from a tech pack.


What technical riding wear demands that ordinary activewear does not


Rider mounted on a horse in the seated, bent-knee posture riding breeches are graded for
Riding wear is graded for a body that is seated, hinged at the hip, knee bent.

The failure modes of equestrian apparel are specific, and they show up in the field rather than on the cutting table. A garment that passes a standard activewear spec can still fail a rider in its first season. These are the points worth writing into a tech pack explicitly.


Four-way stretch with genuine recovery. A breech is loaded in a deep hip and knee flexion for hours, then expected to return to shape. Elastane content alone does not guarantee recovery; the knit or weave structure and the heat-setting matter as much. Specify recovery after repeated extension, not just stretch percentage.


Grip that survives laundering. Silicone full-seat and knee-patch printing is the single most common warranty issue in the category. Printed silicone, bonded panels and woven grip fabrics age differently. Ask for wash-cycle data on the specific grip construction, not a general claim, and specify the wash temperature and cycle count you will stand behind in your own returns policy.


Abrasion where the saddle sits. The inner knee, inner thigh and seat take continuous abrasion against leather. This is a different wear pattern from anything in running or gym apparel, and it is where cheaper fabrics give out first. Martindale or equivalent abrasion figures are worth requesting for the body fabric and the grip panel separately.


Seams that do not sit under load. Flatlock and bonded seams in the seat and inner leg prevent the ridging that causes rubbing. An overlocked inseam running down the contact area is a design error regardless of how well it is sewn.


Moisture management and drying under a layer. Competition dress often means a show shirt under a jacket in summer heat. Wicking performance matters less than drying rate under an occlusive outer layer, which is a different test.


UPF where it is claimed. Sun protection is a reasonable claim for riding apparel, but it is a tested property tied to fabric construction and colour. If a range carries a UPF number, it should be substantiated per fabric and shade, not asserted once for the collection.


Grading for a seated posture. Riding apparel is graded for a body that is seated, hinged forward at the hip, with the knee bent and the leg rotated. Rise, back rise, knee-point placement and the position of the grip panel all change accordingly. A factory grading riding wear off a standard trouser block will produce garments that fit standing and fail mounted.


The retail shift, and why it changes order patterns


Leather saddles on display in an equestrian tack shop
US specialty tack retail lost its biggest chain in 2026.

2026 removed a large piece of US specialty equestrian retail. Dover Saddlery, founded in 1975 and for decades the default American tack-shop chain, was taken over by an arm of its primary lender and then sold in late April to the restructuring firm Gordon Brothers. A WARN notice filed on 7 May listed 112 corporate and distribution roles. Through May the chain announced closures across its remaining locations, having already contracted from a peak of 37 stores to around 30. No Chapter 11 or Chapter 7 filing was made.


The Canadian retailer Greenhawk Equestrian Sport subsequently acquired a number of the former store leases through its US entity and reopened several locations. It acquired leases, not the Dover brand or its inventory.


Against that, the channel data shows where the volume went. Global Market Insights, in a September 2026 report, puts the global equestrian apparel market at $6.96bn in 2025, growing at a 5.5% CAGR to $11.89bn by 2035. Within that, brand-direct online accounted for $1.04bn in 2025 and social commerce, at 4% of the market, is the fastest-growing channel at an 11.7% CAGR. Specialty equestrian stores still hold the largest single offline share at $2.44bn, but the direction of travel is clear.


For a manufacturer or a brand planning production, the consequence is about rhythm rather than price:

  • Smaller, more frequent orders. A brand that once shipped a season's volume into a chain's distribution centre now holds its own inventory and reorders against actual sell-through. That means shorter runs and faster replenishment, not fewer units overall.

  • Size-curve risk moves to the brand. Wholesale buyers used to absorb broken sizes. DTC brands carry that themselves, which raises the cost of a bad grading decision and the value of accurate first-fit.

  • Less forgiveness on lead time. Replenishment against live sell-through only works if the factory can turn a repeat order inside the selling window. Lead time becomes a commercial variable, not an operational detail.

  • Resale is now part of the picture. Secondary-market activity in equestrian apparel has grown enough to be covered as a category shift in its own right, which puts a premium on garments that still look right in their third season.


A sourcing checklist for riding-wear brands


Hands inspecting navy technical fabric for riding apparel
Map the chain to fibre and fabric, not just to the cut-and-sew factory.

On duty and classification

  • Get the HTS classification confirmed by a licensed broker before costing, not after. Fibre content and construction move the MFN rate by more than the Section 301 differential does.

  • Check the Chapter 99 heading that applies to your origin. The forced-labour measure uses subheadings in the 9903.05 range, with separate headings for exclusions and country carve-outs.

  • Ask whether any of your line falls under a Section 232 measure, which is carved out of the Section 301 duty.

  • If you import into the UK, register with HMRC for preferential treatment and get the CETA rules of origin for your line read before the first entry.


On forced-labour due diligence

The tariff's legal basis is each economy's failure to impose or effectively enforce a prohibition on importing goods made with forced labour. That framing raises the stakes on supply-chain traceability independently of the duty itself.

  • Map the chain to fibre, not to the cut-and-sew factory. The exposure in apparel typically sits upstream, in yarn and fabric.

  • Ask for mill-level disclosure in writing, and for the cotton or polymer origin behind it.

  • Keep documentation that would survive a detention, not just an audit certificate.


On the factory itself

  • Ask what their normal order size is, and whether yours is normal for them.

  • Ask to see equestrian product they have made, not activewear they could adapt.

  • Ask who does the grading and whether they have graded for a mounted posture before.

  • Agree a sampling cadence in writing: proto, fit, pre-production, and who pays for each round.

  • Agree wash-test standards on grip panels specifically, with a cycle count both sides will stand behind.

  • Agree lead times for repeat orders separately from first orders. For a DTC brand the repeat lead time is the one that governs the business.


Frequently asked questions


Where is equestrian clothing made?

Most technical riding apparel sold in the US and UK is made in India, Pakistan, China, Vietnam, Türkiye or Portugal. India's equestrian production is concentrated around Kanpur, which has a long equestrian goods heritage, and Tirupur for knitwear. Sialkot in Pakistan is the other long-established equestrian cluster, strongest in gloves and chaps. China and Vietnam serve the high-volume and highly technical end. Portugal and Türkiye serve European brands needing short lead times.

What tariff applies to Indian apparel entering the US in 2026?

As of 24 July 2026, Indian apparel carries a 10% Section 301 forced-labour tariff on top of the ordinary MFN duty for its HTS line. The 18% figure from the February 2026 US–India joint statement was based on Executive Order 14257 under IEEPA, which the Supreme Court held unauthorised on 20 February 2026. The 10% tier is set out in the Federal Register notice published 28 July 2026 at 91 FR 47318.

Is India cheaper than China for riding wear?

On duty, yes, by 2.5 percentage points on the Section 301 line, plus China's legacy List 4A duty where it applies. On the illustrative breech costed above, that is about $2.20 a unit. On FOB and capability the answer is product-dependent: China's technical fabric and trims ecosystem is deeper and its development cycles faster, while India is generally stronger on short runs and on the English-discipline product knowledge the category needs.

Does the Section 301 tariff replace the normal import duty?

No. It is added to the ordinary MFN rate. For apparel in HTS Chapters 61 and 62 the MFN rate commonly sits between about 12% and 32%, so the additional duty is a surcharge on an already substantial base.

Will Bangladesh become cheaper than India?

Possibly, for in-quota volumes. The Section 301 measure directs USTR to establish tariff-rate quotas for Bangladesh, Cambodia, Indonesia and Malaysia, with an initial three-year duration, letting a set volume of textiles and apparel enter free of the Section 301 tariff. As of late October 2026 that mechanism has not been established, so all four pay the same 10% as India.

What MOQ should a new equestrian brand expect?

It varies widely by factory and by whether the fabric is in stock or has to be knitted or woven to order. Fabric minimums, not sewing minimums, are usually the binding constraint on a first order. The useful question to ask a supplier is what their typical order size is, because a factory whose normal run is 20,000 pieces will quote and schedule a 400-piece order badly even if it accepts it.

How long does sampling take?

A proto, a fit sample and a pre-production sample is three rounds at minimum, and grip-panel wash testing adds time on top. Build the sampling calendar backwards from your selling season and treat each round as a scheduled milestone rather than an open-ended iteration.

Did Dover Saddlery go out of business?

Dover Saddlery was sold to the restructuring firm Gordon Brothers in late April 2026 and announced nationwide store closures through May 2026, without filing for Chapter 11 or Chapter 7. Greenhawk Equestrian Sport subsequently acquired a number of the former store leases through its US entity and reopened several locations, acquiring leases rather than the Dover brand itself.

Which HTS code do riding breeches fall under?

Chapter 61 if knitted, Chapter 62 if woven. Women's synthetic breeches commonly fall in the 6104.63 family when knitted and the 6204.63 family when woven; men's woven synthetic breeches commonly sit in the 6203.43 family. Knit versus woven is the determination that moves the rate most, and a visible plastics coating or lamination can move a garment into the 6210 lines at a lower rate. Confirm the exact 10-digit line with a licensed customs broker, and seek a binding ruling for any new construction involving bonding, lamination or silicone grip application.

Can importers reclaim the 2025 IEEPA tariffs?

In part. IEEPA duties collected between early 2025 and 24 February 2026 became refundable after the Supreme Court held on 20 February 2026 that IEEPA does not authorise tariffs. US Customs has been processing refunds in phases, and Phase 3, covering entries that have already finally liquidated, opened on 6 October 2026, currently limited to plaintiffs in the Court of International Trade litigation. Importers should check their 2025 entries with a customs broker rather than assuming they are out of scope.


Sources


Tariff rates and trade rules change. Verify against the primary source before committing to a costing. This page is reviewed as the underlying measures change.


Source

What it covers

Date

Section 301 forced-labour final action: tiers, annexes, exclusions, TRQ direction

28 Jul 2026

India placed in the 10% tier; TRQ not yet operationalised

25 Jul 2026

Chapter 99 subheadings; Section 232 interaction

24 Jul 2026

Tier counts; stacking with existing China Section 301 duties

24 Jul 2026

IEEPA held not to authorise tariffs

20 Feb 2026

The superseded 18% framework, for reference

6 Feb 2026

India–UK CETA entry into force

15 Jul 2026

1,143 textile lines to zero; India's UK market share

22 Jul 2026

Equestrian apparel market size, channel and segment data

Sep 2026

Dover Saddlery sale to Gordon Brothers; WARN notice

23 May 2026

Store closure announcements

15 May 2026

Greenhawk acquisition of former store leases

Undated


Nothing on this page is legal, customs or tax advice. Classification and preferential origin determinations should be made by a licensed customs broker for your specific product and shipment.



Level Up Textiles manufactures technical equestrian apparel in Kanpur, India, for brands in the US and UK: breeches, riding tights, show shirts and tops, in short runs. If you are costing a range under the new rules, write to us at info@leveluptextiles.com.


 
 
 

Comments


Commenting on this post isn't available anymore. Contact the site owner for more info.
bottom of page